TBS Buffer, Lyophilized powder
Cat #: C-BSM17210
Size: 1L/pouch*50
Storage: Store at room temperature for 3 years
Product Introduction:
TBS is a white to off-white instant soluble powder. Each packet of TBS instant powder can be reconstitutedwith1literof 1× TBS buffer, offering a straightforward and convenient operation. The main components of TBS includesodiumchloride, potassium chloride, and Tris buffer salt. In 1× TBS buffer, the concentration of sodiumchlorideis 137mM,potassium chloride is 2.7 mM, and Tris buffer salt is 25 mM. TBS is an isotonic buffer solution commonly used in the field of biology, primarily employed in IHC, in situhybridization,ELISA, and WB experiments. It is frequently utilized as a washing buffer and for antibody dilution and blockingsolutionpreparation
Components:
NaCl : 137 mMl
KCl : 2.7 mMl
Tris : 25 mM
Instructions for use:
1. Measure approximately 600 ml of distilled water and add it to a beaker. Place a magnetic stir bar in the beaker.
2. Position the beaker on a magnetic stirrer and gradually add the entire content of 1 packet of TBS powder. Stirthesolution until it is completely dissolved.
3. Add distilled water to the TBS solution from step 2, bringing it to a final volume of 1 liter, referred to as 1×TBS.
* Upon reconstitution, the pH of the 1× solution is 7.4±0.15 at a temperature of 25°C
艾美捷【速溶】TBS缓冲液,颗粒:
Cat #: C-BSM17210
Size: 1L/pouch*50
Storage: Store at room temperature for 3 years
【速溶】TBS缓冲液,颗粒组成:
NaCl : 137 mMl
KCl : 2.7 mMl
Tris : 25 mM
【速溶】TBS缓冲液,颗粒使用说明:
1. 测量大约600毫升蒸馏水,并将其加入烧杯中。将磁力搅拌棒放入烧杯中。
2. 将烧杯放在磁力搅拌器上,逐渐加入1包TBS粉末的全部内容物。搅拌直至完全溶解。
3. 将蒸馏水加入步骤2中的TBS溶液中,使其达到1升的最终体积,称为1×TBS。
微信扫码在线客服